The Best Places to Buy Crawler Mounted Pneumatic Tophammer Drill Rig Online and In-Store

Last Updated: 06/23/ 4:33 PM

With competitive price and timely delivery, JK Drilling sincerely hope to be your supplier and partner.

Ardco buggy rigs
Atlas Copco  Predator, RD20, RD10, T5, T4(LD)(W)(BH), T3W, T2W, trucm3, TH75(W)(E), TH60 (Bucyrus Erie 22W,36), TH55, TH50, TH40/Cyclone,   TH10
Atlas Copco ROC F9-11, ROC D3, ROC 812, ROC 642, ROC 400A, L8 DTH
Atlas Copcocrawler mounted, ECM-695, ECM490, ECM450, ECM370, ECM350, DML, DMM2, DM-50, DM45E(HP), DM40, DM30, DM25, D3
Barber (Foremost)  DR40, DR24, DR112/24D, DR12/36D
Boart Longyear DB430
Buck Rogers 760, 160
Bucyrus Erie R, 12R, 22W Comination cable tool/top head
Canterra CT-450, CT-312 CT-311, CT-150
Carey
Chicago Pneumatic / Reichdrill   RT- (top head), , 750, 700, T690W, T670 (III), T650(WS) (SL), T625, T600W 
CP/Reichdrill Crawlers: C700, C650, 450
Cubex QXR913,
Davey MR8
DCI
Deeprock D150
Drill2Water
Drillmaster DMAC900, DM400, 300, DM-300
Driltech Crawlers:    D75KL, C50K, D45K, C40K, C25KH
DriltechD60K, Marlin 5, Marlin 4, D40K, D35K, D25K
Duramast 100
DynoDrill Seismic drill
EGT VD, VD
EVERDIGM T450
Fecon/Dynadrill
Foremost (Barber)  DR40, DR24, DR16, DR12
Fraste FS250, MDXL140
Furukawa HCRED, ED, HCR900, 9ES, HCR9
G & R
Gardner Denver  Falcon 40, GD65
Gardner Denver Crawler Drills  ATD, , 65, GD35-CHP, RDC-16B
GEFCO/Speedstar 200K, 185K, 150K, 70K, 50KM, 40K, 30K, 25K, SS-16, SS15, SS-, S-700, Stardrill SD300, SD200, SD50, SS50, 30AW, Ministar, StarDrill, Quickdrill DSI
Geospace 750
Geowelltech R
Gil Beetle
Gus Pech GP900XHR, 600, 22R, C, GP, 450R, Bantam 
Hardab H-6, H-3
HD Engineering HD325P revere circulation, HD120R
Ingersoll Rand  TH75(W)(E), TH60 (Bucyrus Erie 22W,36), TH55, TH50, TH40/Cyclone,   TH100(A), T5(DH)(BH) , RD10, RD20, T4(LD)(W)(BH), T3W, T2W, trucm3
Ingersoll Rand crawlers D, LM600C, LM(EG)500,  ECM-692, ECM-690, ECM-660, ECM-635, ECM-590, ECM-580, ECM570, ECM490, ECM450, ECM370, ECM360, ECM351, (E)CM350, DML, DMMXL, DMH70, DM-50, DM45E(HP), DM30, DM25, DM4
Jaswell J, J, , 950
Mobile B40L
Montabert rock drill
Nordic
PortadrillTLS, 10TL, 10TG
Quickdrill DSI, 275
Reedrill SD250, SK62, SK50, SK45, SK40, SK35, SKF, Terex R20C
Reichdrill / Chicago Pneumatic   RT- (top head), , 750, 700, T690W, T673, T670 (III), T650(WS) (SL), T625, T600W   
Reichdrill/CP Crawlers: C700, C650, 450
Robbins RTT-50
Rockbuster R100
Sandvik
Schramm  TXD200, T130XD, TXD90 Telemast, T985, T685,  685, T660, 555, 455, T450, T300M, T66, T64
Schramm Crawlers: T450
Seismic service rig
Simco , , (HS), SK1- (HT)
Sonic Drill
Speedstar/GEFCO 150,  40K, 30K, 25K, 15K, TH, SS-16-THH, SS15 (II), SS-, S-700, Stardrill SD300, SD200, SD50, 30AW, Ministar, StarDrill, Quickdrill DSI, Failing F8
Tamrock  Pantera, 800.2, Commando 300, CHA560 
Techno 410   
TEI TD75, T46, HEM, HCM550R
Versa-Drill V-, V-, V-, V, V100NG
Walker-Neer Apache  250-40, 150-25, CC,
Wilco

FOREMOSTDR24  (Ref#749Rb)  Manufactured , /350 air compressor, Cat E, PTO, mounted on Ford Sterling truck, recently overhauled including hydraulic system, defective hoses, radiator, oil coolers and compressor serviced  Price: $725,000
Also available:
Mack water tender with knuckle boom cane
/350 air compressors
Gardner Denver FXX FXN mud pump
Foremost drill pipe, 45 joints of 4-1/2” x 20’  
7” Reverse Circulation pipe with swivel and subs, 50 joints  
10-3/4” Beco drill pipe, 50 joints  
Cross overs, subs, cyclone, cement hopper

FOREMOST DR24 DRILL RIG  (Ref#T) Model DR12/26P-60/24-, Built , /350 Ingersoll Rand air compressor, mounted on Kenworth T800 (wide nose) triaxle truck, Cummins engine, 26’ top drive stroke, 20’ lower drive stroke, powerturn/extend jib, 10” discharge swivel, 6” casing adapter, 6” jaws (welder will be removed), rod tub available at extra cost Price:  $960,000 USD

FOREMOST DR24 DRILL RIG  (Ref#T)  Manufactured , Model DR12/26P-60/24-900, mounted on Kenworth T800 Euro 5 Series, located South America  Price:  $1,050,000

FOREMOST DR24 DRILL RIG  (Ref#T)  Year , Model DR12/26P-60/24-900, hours, 900/250 air compressor (approx hours on compressor), 500 hours on hydraulics, mounted on Kenworth 800 truck with Cummins X15 diesel engine, PTO  Price on Request

FOREMOST DR24 DRILL RIG  (Ref#927T)  900/350 Sullair compressor, mounted on Western Star truck with approx 23,500 miles, foam injection, diesel engine pre-heater, spare parts Price:  $815,000

FOREMOST DR24 DRILL RIG  (Ref#Ta)  Upgraded head, rebuilt lower table, on Western Star with Cat C15 engine ( hours since C15 rebuild), hours on Sullair compressor, 44km on truck, good operating rig, full set ups with rods, handling tools, diverters, right hand drive truck located Australia  Price:  $730,000 USD

FOREMOST DR24  18” DISCHARGE SWIVEL  (Ref#Ra)   Manufactured , used very little and in top condition  Price:  $20,000

DUAL ROTARY DRILLING RIG SYSTEM (COMPARABLE TO FOREMOST DR24)  (Ref#T)
System consists of Davey Kent tophead (upper drive) and CR26 (Lower drive) mounted on Soilmec R515 track mounted drill rig
Includes:
CR26 LOWER DRIVE: manufactured , can drive casing up to 26”, approx. 1,200 hours of total usage, 5,500# total weight, 180,000# torque, up to 120RPM, 1,400,000# static load
Comes with jaws for lower drive:  6”, 8”, 16”, 20”, 24” and diverter with 16”, 20” and 24” adapters , cyclone
DAVEY KENT DR-14HP UPPER DRIVE (TOPHEAD):  manufactured , 3 motor topdrive, 500# weight, 3 speeds (75RPMs, 37RPMs, 25RPMs), torque ratings:  14,564# torque@25RPMs, 9,709# torque@37RPMs, 4,855# torque@75RPMs
SOILMEC R515 DRILLING RIG: manufactured , mounted on Cat 330 base with expandable tracks (3,000mm-4,100mm), Cat TA diesel engine, 137kNm / 101,000# rotary  torque (with original soilmec rotary head), telescoping kelly bar.  All parts are there to convert it back to a piling rig.
The unit weighs 105,000# in transport mode (CR26 lower drive is removed during transport)
Price on request

FOREMOST TOOLING AND ACCESSORIES  (Ref#T)  
Angle package for Foremost (Ref#Tb)  includes stand which is mounted on trailer, includes 100’ sections of hydraulic hoses with bulkhead, mast is removed from rig and mounted on stand and runs side by side with rig.  Allows to drill at 25 degree angle  Price:  $75,000
Casing Jaws (Ref#Tc)  20”, 13”, 10”, 8”, 7-5/8”, 6”  Price:  $950 each
Jaws with Casing Clamp 18”, 8”, 7-5/8”, 7”, 6”  Price:  $950 each
7” Left Handed Casing  
(23) 5’ pieces – 115’ total
(26) 10’ pieces – 260’ total
(45) 20’ pieces – 900’ total
(51) 8” x 10’  pieces – 510’ total
8” Drill Pipe
(4) 5” pieces
(28) 15’ pieces
(2) 10’ pieces
Also available:  Discharge head casing adapters (20 different sizes), casing shoes, dual rotary 8” quill, circulating heads.

JASWELLJ-  (Ref#N)  Manufactured , /500 Sullair air compressor, C16 Cat deck engine, 38,000# pullback, mounted on Paystar truck with 500 Cummins engine, 18 speed transmission   PRICE:  $345,000

JASWELL  (Ref#T)  Manufactured late ’s, currently working, Detroit 8V92 deck engine, Sullair 750/250 air compressor, no mud pump, mounted on Mack truck with Mack diesel engine, automatic transmission, all standard features, welder, pipe, tools, ready to go  Price:  $115,000

FRASTE MDXL140  (Ref#T)  Manufactured , 4-speed tophead with side slide (10,000# torque), mounted on rubber tracks, 6’7” width, 6’3” wheelbase, John Deere (140 hp) diesel engine, 11’5” rotary head stroke, 17,000# pullback, 15,000# pulldown, 10” breakout clamps, approx 19,000# overall wegiht, 24’ height with mast up, multipurpose rig ideal for water wells, coring micropiles, soil investigation and drilling with fluids or DTH  Price:  $120,000

HYCAT TRACK MOUNTED DRILL RIG  (Ref#T)  onboard 25 bar (362 psi) air compressor, located Europe  Price on Request

600’ TRACK MOUNTED WELL DRILLING RIG (CHINESE MADE) (Ref#T)  can drill with air or mud, Cummins QSF 2.8 EPA certified diesel engine, 25 joints of 10’ pipe  Price:  $59,000

TRACK MOUNTED DRILL RIG MODEL ZY500 (CHINESE MADE)  (Ref#Tc)  Manufactured , 2 available, 100 hours on each rig  Price:  $195,000 each

NEW 400C CRAWLER MOUNTED OR TRUCK MOUNTED HYDRAULIC DRILL RIG  (Ref#T)   New – never used, Cummins 6LTAA8.9 @ 360 HP, Sauer Danfoss Load Sensed Piston Pumps, Sauer Danfoss PVG Valves, 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque, Rotation Head slides horizontally for casing installation, Rotation Head Tilts horizontally, Floating Spindle with 2.5” Waterway, 25 Tonne Pullback, Dump Mast, 20" Inch Diameter Through the Work Table, Breakout Ram, 8 x 7.5" Mud Pump (Made in India), 10 Tonne Single Line Pull Winch Mounted on Top of Mast, Manuli Hoses on All High Pressure Lines, 4 x Enclosed Outriggers - Can extend outwards so that a lowbed trailer can back under the rig.   Price on Request
Also available a more compact version with (2) lpm mud pumps in place of the 8 x 7.5" pump

REVERSE CIRCULATION TOP DRIVE DRILL RIG PACKAGE  (Ref#T)  Mounted on Ardco 6 x 6 buggy, Cat engine, 13 speed transmission (engine and transmission recently gone through), RTO gear box into sub drive box, Ramsey Model 800 winch, Sullair 750/350 air compressor, 30,000# pulldown, 53,000# pullback, 0 – 70 rpm rotation, ft/lbs, mast angle to 40 degrees, slides to ground, ’ depth capacity, approx. ’ of 3-3/4” x 15’ dual tube drill pipe, dual rear leveling jacks, 50 gpm Bean injection pump, 400 gal injection tank, Casing advance system with 100’ of 6” drill pipe  Price:  $375,000

NOVAMAC REVERSE CIRCULATION TRACK DRILL  (Ref#Ta)  Manufactured , angle package, QSB Cummins engine ( hours), 41,000 lbs hoist, PLC control remote operating station, Hiab pipe arm with clamp, pipe loader on mast, hydraulic pipe rack (carries 200m of 4” RC pipe x 3m length), onboard rack stands up to 70” for easy pipe handling, floating spindle, lbs rotary torque, lb wireline winch, lb tugger winch, water injection, hammer oiler, cyclone  Price:  $350,000 USD

EDM (Exploration Drill Masters) SLIDING ANGLE MAST DRILL RIG (Ref#Tb)

Year , mounted on International 8x4 truck, set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,000# (800# torque@1,500 rpm), sliding angle mast which is capable of angles up to 45 degrees with 2,000mm mast dump, no air compressor, no mud pump, Cummins QSM-11 tier 3 diesel deck engine, 40,000# pullback, 40,000# main winch, high speed wireline winch for coring, FMC (bean) water pump (140l/min or 35 gpm), hydraulic rod break out, rod spinner with 11,000# breakout torque, approx. drill depths:  4.5” dual tube RC pipe – 350m, BQ coring pipe 2,800m, NQ coring pipe 2,000m, HQ coring pipe 1,500m, PQ coring pipe – 1,100m, overall weight without truck 22,000KG / 48,000# Price:  $685,000REDUCED to $540,000USD

EDM SLIDING ANGLE MAST DRILL RIG (Ref#Tc)

Year , mounted on International 8x4 truck, Set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,000# (800# torque@1,500 rpm), sliding angle mast which is capable of angles up to 45 degrees with 2,000mm mast dump, no air compressor, no mud pump, Cummins QSM-11 tier 3 diesel deck engine, 40,000# pullback, 40,000# main winch, high speed wireline winch for coring, FMC (bean) water pump (140l/min or 35 gpm), hydraulic rod break out, rod spinner with 11,000# breakout torque, approx. drill depths:  4.5” dual tube RC pipe – 350m, BQ coring pipe 2,800m, NQ coring pipe 2,000m, HQ coring pipe 1,500m, PQ coring pipe – 1,100m, overall weight without truck 22,000KG / 48,000# Price:  $685,000 REDUCED to $540,000USD

EDM SLIDING ANGLE MAST DRILL RIG  (Ref#Td)

Year , mounted on International 8x4 truck, Set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,000# (800# torque@1,500 rpm), sliding angle mast which is capable of angles up to 45 degrees with 2,000mm mast dump, no air compressor, no mud pump, Cummins QSM-11 tier 3 diesel deck engine, 40,000# pullback, 40,000# main winch, high speed wireline winch for coring, FMC (bean) water pump (140l/min or 35 gpm), hydraulic rod break out, rod spinner with 11,000# breakout torque, approx. drill depths:  4.5” dual tube RC pipe – 350m, BQ coring pipe 2,800m, NQ coring pipe 2,000m, HQ coring pipe 1,500m, PQ coring pipe – 1,100m, overall weight without truck 22,000KG / 48,000#Price:  $685,000REDUCED to $640,000USD

CUSTOM BUILT REVERSE CIRCULATION RIG  (Ref#T)  uses dual wall pipe  POR

UDR RANGE III DRILL RIG  (Ref#T)  75’ mast, 90,000# hookload capacity, Reineer 62 top drive, 44,000 Rexroth drawworks, mounted on International I triden axle truck (525 hp), hydraulics refurbished at a cost of $175,000  Price:  $145,000
Also available:  Matco sub $35,000

100HP (’) CUSTOM BUILT TOP HEAD PULLDOWN DOUBLE MAST RIG (Ref#R)
Custom built in , late model, 4G certified, built for purpose, small footprint, rapid mobilization- from arrival of first load at location to commencement of drilling is less than two days.
Trailer Mounted.
Can drill up to 12,000’ using 5” drill pipe and up to 14,000’ using 3-1/2” drill pipe
HP Rig Power:  (2) 515hp Cat C15 engines
480,000# holdback capacity
80,000# pulldown capacity
35,000 ft/lb top drive rotary torque
65’ x 40’ drill footprint
Mast:  480,000# mast, 98’ H x 8’ W x 7’ D
Substructure:  16’ high hydraulic leveling, self-supporting (no guide wires) mechanical outriggers
13’ height under rotary beams, matting boards, accessories
(2) winches 17K; 6K
Laydown line
Topdrive Carriage: 
480,000# holdback capacity
80,000# pulldown capacity
35,000 ft/lb top drive rotary torque
4” kelly line
Hydraulic bail extension/retraction
Mounted backup clamp and guide bell
Work platform for maintenance
Computer controlled lighting system
Control System:
Full computer based control system
Capability of accurately controlling bit weight, ROP, rotary speed, rotary torque, auxiliary functions
Fault Management
Touch screen interface
Remote monitoring capabilities via internet
Self-reporting diagnostics
Automatic mitigation of fault conditions with minimal loss of functionality
Full WITS Communication
Mud System:
(1) 600 kw generator sets
Pits (like new):   
(1) 62’ x 11’6” x 7 – 500 bbl mud shaker tank with (3) partitions
               (2) 5” x 6” centrifugal pumps p/b 75 hp electric motors
(1) 55’ x 11’6” x 7 – 300 bbl mud suction tank with (3) partitions
               (2) 5” x 6” centrifugal pumps p/b 75 hp electric motors
               800 bbl mud system
Bop Stack:
Double ram:  13 5/8”
Annular:  13 5/8”
Accumulator:  Koomey type 80 6-station, 210 gallon accumulator
Rotating Head:  Washington psi
Choke Manifold 5,000 psi 4-1/16” x 2” and (2) 2-1/16” adjustable chokes
Gas Separator:  10” flanged flow line, 4” flare line
Accessories/Pipe Handling Equipment:
7,000# jib crane, winch boom, rotate
17,000# main winch
Racking board (racks 11,880’ of 4-1/2” doubles, folds for transport
Quick Change Hydraulic Power Slips
Adjustable Height Tong Pulling System with Torque Limiting
Power Tongs: Varco SSW30 and 13-3/4” D & D  Power tongs
Catwalk:  42’ x 8’ x 42” with walkway
4 kw rig lighting system
PRICE:  $2,500,000

PORTADRILL TLS  (Ref#R)  Manufactured , 900/350 Sullair air compressor, 12V71 Twin Turbo Detroit diesel on deck (recently rebuilt), pulldown catwalks all around, 54’ 2-piece mast, swing out head, racking boards, 90,000# pullback, hydraulic breakout tongs, oil injection, mounted on 4 axle Kenworth C500 truck with Detroit 6V92 Turbo diesel, 22” retractable table opening, 7 hyd leveing jacks, foam injection, sandline, jib, 6-part 120,000# main block, ’ of 5” flush joint, bits, bailers, subs, 35 gpm Bean pump, 14 new tires and wheels  Price:  $295,000

PORTADRILL TLS  (Ref#Ta)  Modified for 20” casing, 900/350 Sullair compressor, 12V71TT Detroit deck engine, Noster top head and Noster gear box, 80,000# pullback, 90,000# downstroke, heavy chain, double drum (sandline and main line), 28’ stroke, mounted on 6 wheel Kenworth with 6v92T truck engine, no rod box, no carousel, Cat injection pump, weight 80,000#  Price on Request 

PORTADRILL TLS PROSPECTOR  (Ref#Ta)  Manufactured , top head drive, 4 part line on 60,000# main block, transmission on deck, 900/350 Sullair compressor, N14 Cummins deck engne (rebuilt), mounted on Paystar truck with DT466 engine, 4 speed transmission, brand new rear tires, retractable table,   
Rig tender water truck (Ref#Rc)   gal water tank, fuel tank, rebuilt engine
Approx ’ of drill pipe, 6” hammer with 6” bit, 8” hammer with 8” bit
Package Price:  $215,000

PORTADRILL TLS  (Ref#T)  Manufactured , 750/250 Sullair air compressor, Detroit 8V92 deck engine, 60,000# hoist line, Portadrill 671 top head, 42’ mast with sliding table, electric oiler, 53,000# pullback, 9 gal Bean water injection, 5,000# sandline, water injection, mounted on International with DTi 466 (210 hp),13 speed transmission, 3 outriggers (1 front, 2 back),  currently drilling  Price:  $165,000
Pipe available at extra cost.

PORTADRILL TLS  (Ref#Td)  Built , rig remounted and completely rebuilt in , 5-1/2 x 8 Gardner Denver mud pump, 500 cfm air compressor, new oil coolers for rig hydraulics, mounted on Freightliner Classic, 12.7L Detroit diesel (420 hp) with Jake brake, 13 speed RR transmission, all new hydraulic hoses and hydraulic tank, all rig hydraulic cylinders rebuilt, tophead hoist cylinders rebuilt, rebuilt power diverter, new chain bearings and sprockets, new transfer case for truck to rig power, Noster top head (set up for 4-1/2” x 2-3/8” x 20’ drill pipe, hydraulic type D breakout tong, spare drawworks avaialble, new pulldown chains and sprockets, good paint, tires and wheels, like new condition, Price:  $400,000

PORTADRILL TLT 272  (Ref#Ra)  Manufactured , 750/250 LeRoi piston air compressor, 41’ tower, 50,000# pullback, mounted on International Paystar with rebuilt Cummins 350, 8V92 deck engine  Price:  $85,000

PORTADRILL TLT 276  (Ref#Rb)  Manufactured , 750/250 LeRoi piston air compressor (needs rebuild), 41’ tower, 50,000# pullback, Detroit 8V92 deck engine, mounted on Diamond Rio truck  Price:  $65,000

PORTADRILL TG600 DRILL RIG  (Ref#T)    Manufactured , Noster tophead w/3” King swivel, Atlas Copco DT4 715/125 air compressors, Failing 5 x 6 mud pump with pit, 30,000# pulldown, double drum 2-part 5/8” drawworks for casing line/tophead w/brakes, Detroit 6V71 on deck, rod box and auto carry out with 11 pcs of 4-1/2” x 25’ pipe, 20’ stabilizer, (2) 8-1/2” roller cone bits, casing clamps, split breakout table w/Petol, Cat triplex water injection, 3” Versa-matic diaphragm grout pump, 250 gal fuel, tool and block storage, mounted on Crane Carrier with Henrickson suspension w/8.3L Cummins, 13 speed transmission  Price:  $90,000

PORTADRILL 10TG 600 (Ref#N)  Manufactured , 256 S2 LeRoi air compressor, 5 x 6 mud pump air driven, 45’ mast, line oiler, Detroit 6V71 diesel deck engine (recently rebuilt), mounted on Crane Carrier,  line oiler, no pipe, good condition  Price:  $50,000

PORTADRILL 10TG  (Ref#337N)  Manufactured , top head drive, 600/150 air compressor (overhualed, 6V71 Detroit diesel engine (overhauled), mounted on Crane Carrier with 450 Red Diamond engine, as is    Price on Request

GEFCO

SPEEDSTAR 150K  (Ref#R)  Manufactured , Cat C15 (550 hp) engine, rebuilt topdrive, mounted on crane carrier.  Also comes with substructure  Price:  $450,000
Available for extra cost:
International van DTT466 with Geolograph and tool cabinets with Miller 225 generator watt power unit
Sullair 900/350 air compressor trailer mounted
National C150 powered by 6V71 Detroit trailer mounted
130 jts of 3-1/2” drill pip double white 13.30# Grade E
(6) 5” x 30’ drill collars
Mack Haul Truck and 40’ flat
Pipe racks, misc hoses, bits, subs

GEFCO 30K DRILL RIG  (Ref#T)  Manufactured , Sullair /350 air compressor, Moynco 3CL8 onboard hydraulic pump, 40,000 lb pullback, mounted on Peterbilt tandem axle truck, total engine hours, total compressor hours, approx 27,500 miles, 800’ of 4-1/2” (2-7/8 IF) drill pipe  Price: $815,000

GEFCO 30K-HD DRILL RIG PACKAGE  (Ref#T)  Manufactured , /350 air compressor, ’ of 3-1/2” drill pipe, Diamond C 25’ gooseneck trailer, misc parts  Package Price:  $775,000

SPEEDSTAR 30K  (Ref#N)  Manufactured , 900/350 air compressor, mounted on Peterbilt with 400 Cummins engine, PTO, Bean water injection, single rod loader, sandline, bailing drum, hydraulic ram, breakout wrench, 3 leveling jacks, no pipe or tools, good condition    PRICE:  $165,000

GEFCO STARDRILL 100  (Ref#Tb)  Manufactured , track mounted, 14-1/2’ stroke, set up for coring, 360’ NWJ rod, 3 x 5 Wheately pump available (but no installed on rig)  Price:  $99,500

SPEEDSTAR 300-100 DRILL RIG  (Ref#Tb)  John Deere diesel deck engine, mounted on Ford with Cummins engine, 300’ drill pipe, good condition  Price:  $69,500

GEFCO STARDRILL (Ref#Tc)  Price:  $180,000

GEFCO 22 MINI TOP HEAD DRILL RIG  (Ref#T)  Manufactured , 200 cfm air compressor, 3 x 4 Tibban mud pump, mounted on Ford truck with DT466 engine, top head needs rebuilding, main pump is leaking, transfer case is removed from rig, switch driveline to drill, needs outer cover for mud pump.  New radiator on top drive motor, 30k top head and pumps  Price:  $110,000

SPEEDSTAR SS15-III DRILL RIG  (Ref#Tb)  Manufactured , mounted on tandem axle International Paystar  Price on Request

SPEEDSTAR SS15-II  (Ref#N)  Manufactured , top head, 5 x 8 duplex mud pump, 800/350 air compressor, mounted on International paystar with Cummins diesel engine, hydraulic welder, 400’ drill pipe PRICE:  $165,000

SPEEDSTAR SS15  (Ref#T)  Manufactured , top head drive, LeRoi 256S2 air compressor, no mud pump, standard mast and pullback, hydrostatic drawworks, rod box, mounted on double front end in Crane Carrier with 300 Cummins engine, PTO, 4-1/2” pipe, bits, stabilizers, hammers  Price:  $120,000

SPEEDSTAR SS15  (Ref#T)  Manufactured , completely rebuilt, Leroi 256S2 air compressor, mounted on Canadian Crane Carrier with 350 Cummins engine, new tires,  Myers 14 gpm injection pump, pipe rack, standard mast and pullback, 400’ of 4-1/2” x 20’ drill pipe  Price:  $195,000
Tiger Tierra casing hammer available at extra cost

SPEEDSTAR SS15 (Ref#N) Manufactured , PTO, mounted on crane carrier with Cummins engine, extended mast, rig has Welco Beales casing hammer lift system, but no casing hammer is availale, 600/250 air compressor, sandline, mainline, casing line, retractable table, Cat water injection, chain pulldown, jib boom, breakout tongs, 3 hydraulic leveling jacks, hook & block, no rod box or pipe rack  PRICE:  $45,000

SPEEDSTAR SS15-III DRILL RIG  (Ref#T)  Manufactured , LeRoi 256-S2 450/250 air compressor, 4 x 4 x 13 centrifugal pump (he uses for drilling), mounted on GMC truck with 290 Cummins engine, PTO, rod box, leveling jacks, no carousel, 300’ of 3-1/2” x 20’ flush wall drill pipe, good shape, running rig, handling tools, bits  Price:  $60,000

SPEEDSTAR SS15 II (Ref#R) extended mast, mounted on CCC with 400 Cummins engine, 256 Leroi air compressor, plumbed for mud, sandline, 5 part main, 2 part secondary, small swing jib boom  Price:  $80,000
500’ of 4 1/2” pipe available at extra cost

SPEEDSTAR SS-15  (Ref#Rb)  Manufactured , 550/250 Leroi compressor (rebuilt), extended mast, mounted on Crane Carrier, needs work  Price:  $32,500

SPEEDSTAR SS-15THH DRILL RIG  (Ref#T)  Manufactured , Leroi 600 cfm air compressor, no mud pump (but plumbed for one), mounted on 4 axle Crane Carrier, 350 Cummins diesel engine, PTO, Fuller transmission, 3 hydraulic leveling jacks, no rod box, no pipe included, currently drilling  Price:  $60,000

SPEEDSTAR SS15THH  (Ref#)  Manufactured , 450/250 LeRoi air compressor, 5 x 6 Gardner Denver mud pump, mounted on Crane Carrier with 350 Cummins engine, water injection, casing hammer, 2 rear 1 front leveling jacks, includes 300’ of Mayhew Jr. 2-3/8” x 20’ drill pipe, good condition, currently drilling  Price:  $110,000

SPEEDSTAR  (Ref#T)  Manufactured , top head drive, rebuilt top head, 4” centrifugal pump, no air, mounted on International with DT466 diesel engine, manual clutches, currently working but needs some work, truck not DOT  Price on Request

SPEEDSTAR TOPHEAD DRIVE DRILL RIG  (Ref#Ta)  75,000# pullback, ’ drill capacity, mounted on Peterbilt truck, new Cummins 400 engine, hydraulic runs off truck  Price:  $65,000

QUICKDRILL 275 (Ref#RA) Manufactured , PTO, mounted on International single axle truck with diesel engine, GD 5x6 mud pump, 185cfm air compressor, no rod box or pipe rack, 1 front & 2 rear hydraulic leveling jacks, needs work, mud pump needs expendables and gear work, air compressor not working, truck needs new rear end  Price:  $45,000

QUICKDRILL DSI 275  (Ref#T)  Manufactured , 4-1/2 x 5 mud pump, 150 cfm air compressor, good drawworks, 20’ stroke, 3 hyd leveling jacks, needs to be remounted,  Price, as is:  $20,000

VERSADRILL V DRILL RIG  (Ref#T)  Built , recently reworked, /350 Sullair air compressor, plumbed for hydraulic pump, mounted on Kimble Classic truck with Cat C16 engine, transfer case (upgraded to larger one), top drive rebuilt with 2 hydraulic motors replaced (500 hours), $50k worth of new hoses, replaced or repaired all hydraulic pumps (500 hours), joy sticks reworked, valves replaced, 95% tires, approx. 6,500 miles (they haul to location), all tools, slips and wrenches  Price:  $650,000

VERSADRILL MARK 70 DRILL RIG  (Ref#T)  Manufactured , low hours,  600/250 Vanair compressor (plumbed for additional air and booster), 4x3x13 Mission Magnum centrifugal mud pump (also plumbed for aux mud), 18,000# main winch, 2,000# aux winch,  70,000# pullback, 28,000# pulldown, options include aluminum catwalk, auxiliary rod handler modified to handle 5.5" x 20' matrix drill rods and is mounted on skid,  Mounted on Peterbilt 367HH 6x4 truck with Cummins ISX (605HP) diesel engine and Fuller 13 speed transmission, PTO Fabco transfer case  Price:  $950,000

VERSADRILL X DRILL RIG  (Ref#T)  Manufactured , 750/300 Ingersoll Rand air compressor, 5x6 Gardner Denver mud pump, 40,000# pullback, no carousel (currently using 3.5" x 20' rods), rod box (can hold 500'), hammer oiler, water injection pump, 12,000# min winch, 2,000# sandline, mounted on International truck with Cat C12 PTO engine, comes with 10 joints of 3.5" x 20' pipe Price $235,000 USD

VERSADRILL V100NG DRILL RIG  (Ref#N)  Manufactured , 300/200 air compresor, 5 x 6 Gardner Denver mud pump, 3 x 4 Mission pump, 12,000# winch, jib boom, mounted on International 6x6 truck with DT466 engine, pipe rack, 11 rod carousel  Price:  $325,000

VERSADRILL V100 DRILL RIG  (Ref#T)  Manufactured , Fully rebuilt , 300/200 air compressor, Mission Magnum centrifugal mud pump, mounted on International truck with DT466 engine, PTO, 7 rod carousel (set up for 3-1/2” pipe) new cutch, new pipe, 4 hydraulic leveling jacks, Price:  $325,000

VERSADRILL V100 DRILL RIG  (Ref#T)  Manufactured , Reworked in (at a cost of $50,000), 300 cfm/200 psi Sullair screw air compressor, 3 x 4 Mission magnum centrifugal pump, mounted on International truck with Navistar DT466 diesel engine, Spicer 7 speed transmission, Fabco 12,000 lb front axle, Rockwell 40,000 lb rear tandem axles, PTO, 31’ derrick 40,000 lb rating, (2) motor spur gear top head, 4 leveling jacks, 7 pod carousel, pipe rack, 12,000 lb main winch, jib boom, 4,000 lb winch  Price on Request

VERSADRILL V100 VERSA-SONIC 50K DRILL RIG   (Ref#514T) Manufactured , 50K Rousey head, 26.5’ drill stroke, 24,500# pullback, hydraulic jib boom, sandline winch, 2,000 lb main winch, rod box storage, retractable 3” – 13” breakout clamps with rod spinner, Sullair 300/200 air compressor, Moyno 3L6 mud pump (recently rebuilt), FMC Bean piston water pump LD, air compressor, 2 front leveling jacks, 2 rear leveling jacks, mounted on International 6x6 truck, driller’s platform, helper’s platform, Matrix 4-1/2” x 6-5/8” x 8-5/8” drill spindle,  recently rebuilt breakout table and serviced the cooling system and replaced a large amount of hydraulic lines.   Price:  $235,000

7 ROD CAROUSEL FOR VERSADRILL  (Ref#Tc)  POR

GEOSPACE H800  (Ref#T)  Manufactured , 3 x 4 mud pump, developmental air, 200’ of 3-1/2” pipe, mounted on Ford 2 WD diesel (engine could use replacing but runs and drives)  Price:  $35,000

GEOSPACE 750  (Ref#T)  Developmental air compressor, heavy duty winch on front, 391 PTO gas engine in truck, Mounted on Ford truck, 2 rear hyd jacks, in Nov they started up the rig and replaced all the hydraulic hoses Price:  $27,500

GEOSPACE (CAREY) DRILL RIG  (Ref#Tb)  Mounted on 6 WD International truck with 9.0 engine, air compressor, no mud pump, used for 2” wells  Price on Request

GUS PECH BRAT-A-SONIC DRILL RIG  (Ref#T) Manufactured , equipped with Boart Longyear PS 150 sonic head (conversion done in including:  Finger board added with new jib boom, Boart Longyear jaws added, hydraulics upgraded to accomodate new head and jaws, feed cables replaced, new dum cylinder) Mounted on Sterling L 6x4 truck with Mercedes 12.8L engine, PTO, RTO 8LL transmission, Bean pump, Moyno pump, cold weather package, , coring attachment, elevated driller’s platform  Price:  $425,000

SONIC SDC390-14 DRILL RIG  (Ref#T)  Cat 6 cyl 6.6 Turbocharged engine, 12.3’ head travel, 22,600 lb pullback, 12,369 lb pulldown, max casing length 10’, Sonicor 50K sonic head  Price on Request

CAREY – none available at this time

DCI 140TH RIG  (Ref#N)  Similar to Speedstar (manufactured by Drill Concepts in Florida in , 500/250 Sullair air compressor, 4-1/2 x 5 Gardner Denver mud pump, 30,000# pullback, 20,000# push down, mounted on Ford L 10 wheeler truck (floatation tires on front) with Cat engine, power divider in drive shaft, 2 hydraulic riggers on top of mast, 26’ mast, Bean pump, diaphragm mud pump, 3L6 Moyno pump, small welder, 18” table with bushings, 300’ of Mayhew Jr. pipe with sub, subs, set up with 4 stabilizers, single rod holder, dual controls, drills approx 100’ an hour, sitting since  Price:  $170,000

G & R 4” RIG  (Ref#N)  Manufactured , mounted on International truck 6.0 diesel engine, PTO, hydraulic walking beams, 2 x 3 centrifugal pump, 3” diaphragm pump, 125/150 air compressor, 3 leveling jacks, top head drive with swing out top head, 180’ of 2-5/8” pipe, mud tank, rig in running condition, needs some TLC  Price:  $45,000
Water truck available at extra cost

G & R TOPHEAD RIG (Ref#R) PTO, mounted on International with DT466E engine, 5 x 6 GD mud pump, brand new IR air package 185/150, # and 11,500# winches, breakout wrench, 4 hydraulic leveling jacks, no pipe available, ready to go  Pricee on Request

G & R TOPHEAD RIG (Ref#Ra) Refurbished & updated, mounted on Chevy C-65 with C2 engine, rebuilt 4 1/2 x 5 mud pump, developmental air compressor, slide tophead, slide table, rod rack, 2 winches, walking beam, 4 hydraulic leveling jacks, 200’ of 15’ FDEP drill pipe, ready to go    PRICE:  $105,000

HURRICANE TOP HEAD DRILL RIG  (Ref#T)  Manufactured ’s, air compressor, centrifugal mud pump, mounted on Peterbilt truck with Cat engine, PTO, pipe rack, no carousel, 100’ of 3-1/2” x 20’ drill pipe  4 hydraulic leveling jacks  Price:  $75,000

EXPLORER   (Ref#Tb)  Built , low clearance rig, 12’ mast, bare rig with tophead and hydraulic centrifugal mud pump, no engine, sitting several years  Price:  $9,500

GARDNER DENVER FALCON 70  (Ref#Ta)  /350 air compressor, mud pump, Detroit 12V71 deck engine, mounted on International Paystar 4-axle truck.  International Paystar flatbed water truck    Package Price:  $120,000

GARDNER DENVER 40 BLASTHOLE MUD ROTARY TOP HEAD DRIVE  (Ref#N)  Manufactured , mounted on 4 axle Crane Carrier with Detroit diesel, 5 rod carousel    PRICE:  $38,500

GARDNER DENVER 40T BLAST HOLE RIG  (Ref#T)  Built , 90,000# pullback, 600/120 air compressor, Detroit powered, mast will accommodate 26” x 40” casing, 3” plumbing and swivel for mud or air, originally built for uranium mining  Price:  $220,000

BUCK ROGERS - none available at this time

SHOP BUILT TOP DRIVE DRILL RIG  (Ref#T)  Built , mounted on Ford F700 truck, Cat , 1 winch, 20’ mast, Gardner Denver 5 x 6 mud pump, top drive and top end of motor rebuilt, all new hydraulic hoses and valves, Price:  $110,000

SHOP BUILT TOPHEAD RIG  (Ref#a)  manufactured , hydrostatic, mounted on International all wheel drive truck w/DT466 engine, PTO, 5 x 6 Gardner Denver mud pump, developmental air compressor, breakout wrench, hydraulic pulldown, stabilizers, all bits, subs and tools, 400’ of 3-1/2” x 15’ drill pipe, excellent condition, drills daily  Price:  $80,000
INTERNATIONAL SERVICE TRUCK  (Ref#b)  diesel engine, underbody air 125 cm  Price:  $16,000

SHOP BUILT TOPHEAD DRILLING RIG  (Ref#Tb)  Buit , 160 psi piston air compressor, 2 x 3 centrifugal mud pump, mounted on International single axle truck with DT466 diesel engine, no water injection, no carousel, rod box, 2 rear hydraulic leveling jacks, stored inside  Price on Request

SHOP BUILT TOPHEAD RIG  (Ref#T)  trailer mounted, Kubota diesel deck engine, 2 x 3 centrifugal mud pump, no air, 4 manual leveling jacks, stored inside, 100’ of 10’ Mayhew Jr rod, subs and tools  Price:  $37,500

SHOP BUILT TOPHEAD RIG  (Ref#Tb)  no air compressor, 3 x 4 Cobra centrifugal mud pump, unmounted  Price:  $9,500

SHOP BUILT TOP HEAD RIG  (Ref#T)  trailer mounted, centrifugal pump, 4 tires, deck engine hydraulic driven with jacks  Price:  $26,500

SHOP BUILT RIG (Ref#R) similar to T64, Detroit Silver 92 deck engine, mounted on mid ’s International with diesel engine, IR 750/350 air compressor, no mud, water injection, pipe rack, 200’ of 4 1/2”  x 20’ drill pipe, sitting but running when parked, located Canada  Price:  $47,500 Canadian

SHOP BUILT TOP HEAD DRILLING RIG  (Ref#T)  550’ depth, 4 cyl Detroit diesel deck engine, Mission 4 x 3 mud pump (1 year old), Westinghouse air compressor, mounted on Ford truck with 6V71 diesel engine, PTO, no rod rack, 3 leveling jacks, approx 650’ Mayhew drill rods, casing adapters, drill bits, fishing tools.
Also included:   International Water Truck, gallon tank, welding machine, 6 cyl diesel engine
Package Price:  $59,500

SHOP BUILT COMBINATION RIG (Ref#T)  Tophead/rotary, PTO, mounted on International with DT466 engine, double trans, retractable rotary table, 2 rear hydraulic leveling jacks  Price on Request

WATER WELL RIG (Ref#R) mounted on GMC, includes International water truck with gallon tank & aux. air compressor, pipe & tools   Price:  $80,000

WALKER-NEER 250-40 DRILL RIG  (Ref#T)  Refurbished , (2) Cat C15 diesel engines (one powers rig, one powers HPU), pipe handling arm, currently reworking tophead  Price:  $170,000

WALKER NEER 250-40 DRILL RIG PACKAGE  (Ref#Ta) 
Top head Drive drill rig, Cat (500 hp), Alliston 750 transmission, capable of running casing up to 43’, pipe handling boom, hydraulic pipe tongs, pulldown equipped (pulldown chains have been removed), rated to ’ with 250,000# pullback, 50’ mud boat style sub (14’ wide at rear/10’ wide under rigs entire length)
(15) 6” drill collars, 110 jts of 4-1/2” Xhole drill pipe 16.60
Triple axle collar trailer with ibeam saddle for holding tubulars (also used to haul pipe handling boom)
40’ trailer mounted hydraulic doghouse with Geolograph recorder (3 ph electric panel and 3 ph – 1 ph transformer with breaker box for single phase
gal fuel tank on skid with gen house set up for 2 generators, electrical panel, 3ph-1ph transformer with breaker box (generators need to be refurbished and installed)
800 bbl mud system with derrick shaker, mud hopper and centrifugal pump
Emsco D500 mud pump with Detroit Series 60 skid mounted with suction boom arm
8” Hydrill BOP built onto rotating rubber diverter, Blind Ram style BOP, Choke Manifold, skid mount closing unit with accumulators
Various change overs and subs, casing running subs for 4-1/2, 5-1/2 and 8-5/8” w/tophead drive
Package Price:  $420,000

WALKER NEER150-25  (Ref#T)  Complete with mud pumps, doghouse, drill collars pipe  POR

ROBBINS RTT-50 (Ref#R) Manufactured , PTO, mounted on 4 axle carrier with Cummins 350 engine, 800/125 air compressor (updated to /125), 4 rod carousel, dust collector, # pullback, # pulldown, 200,000 ft/lbs torque, 38’ mast, rear cab, 16” opening in table, hydraulically raised and lowered drilling platform, used for large diameter blasthole, (3) joints of 5” x 25’ drill pipe    PRICE:  $40,000

HARDAB 5K6 TOP HEAD REVERSE CIRCULATION DRILL RIG  (Ref#T)  Manufactured , Patented pipe handling system with 660 ft. drill pipe on board, 2-speed top head (70,000 lbs-in torque), mounted on rubberize steel tracks, 7'5'' width, Deutz  (74 hp) diesel engine, 30’4” mast length, 11,000# pullback, 7,800# pulldown, double breakout wrench, approx 25,500# overall weight, Hydraulic welder, Winch 770 lbs, Hammer oiler, sliding mast for angle, RC package optional   Price: $440,000.00 CAD

SIMCO  (Ref#T)  Manufactured , 200/400 Sullair compressor, 10” diaphragm pump, MCM centrifugal pump (2 years old), 2 winches 10,000# and #, new swivel, new bearing box in top head, mounted on Ford L truck with Cummins 8.3L engine, PTO, 200’ of 2-7/8” dia x 20’ heavy weight FEDP drill pipe, mud pan, good condition, currently working  Price:  $135,000 USD

SIMCO TR TRACK MOUNTED DRILL RIG  (Ref#T)  Cat D4 carrier on metal tracks, 10-ton carrier winch, Duetz 6 cylinder diesel engine, two winches, breakout hydraulic wrench, 2-speed rotary power head, small mud pump  Price on Request

SIMCO  (Ref#Ta)  Manufactured , Ford 300 deck engne, 3 x 4 Mission mud pump, no air, set up for water well and geothermal, 180’ of 3-1/2 x 15’ rod (2-3/8 IF), mounted on Ford with Cat engine  Price:  $48,500

SIMCO (Ref#R) Manufactured late ‘70s, PTO, mounted on Ford with diesel engine, dual topheads, 5 x 6 hydraulically driven mud pump, (3x4 centrifugal also avail) hydraulic cooler, no cathead, developmental air compressor, rod spinner, 4 hydraulic leveling jacks, rig needs new transfer case  Price: $65,000

SIMCO   (Ref#Ta)  POR

AQUA BORE TOP HEAD ROTARY RIG  (Ref#Tb)  Manufactured , skid mounted, gas engine, 100’ Mayhew Jr drill pipe, breakout wrench, 2 x 2 centrifugal mud pump, located Canada  Price:  $19,500 USD

DEEPROCK

DEEPROCK 155 DRILL RIG  (Ref#T)  Manufactured , 4x3 Mission Magnum mud pump, no air, uses 15’ drill pipe, slide out tophead that makes capable of setting 20’ casing with 4’ clearance from the ground, mounted on Ford 650 single axle truck with Cummins diesel PTO engine, Otto rod handling system, jib boom, tophead, 4 leveling jacks, comes with 300’ of 15’ x 2-3/8 Mayhew Jr drill pipe, brand new 4x8 aluminum mud pan
Unit was overhauled in including drain/fill transmission with 50wt synthetic, gearbox drain/fill with 50wt synthetic, all hydraulic filters changed, rebuilt otto rod loader (new bearings, clamps and wear bolts), Tophead disassembled and installed new bearings and seals/add fluid plug sight and drain plug/refill with 80-90 gear lube, mud swivel rebuilt, rebuilt autobreakout system, replaced all mud piping with welded SCH 80 and stainless steel ball valves, install 4x3 mission mud pump and hydraulic motor, rebuilt mast lock, all new headslide machine bolts, many hoses replaced, 4 stabilizer jacks resealed Price:  $170,000

DEEPROCKDR150  (Ref#T)  Manufactured , track mounted, Perkins diesel engine, upgraded 4 x 3 Mission mud pump, pipe rack (holds 200’ but 300’ of 2-3/8” x 10’ pipe coming with rig, auto loader  Price:  $97,500

DEEPROCK DR100 DRILL RIG  (Ref#Tab)  Two available, 500 gallon on board tanks, 170’ drill rods, 32 hp pump motor 3 x 2, separate hydraulic motor, mud pan Price:  $55,000 each

DEEPROCK DRILL RIG  (Ref#Ta)  Trailer mounted, 16 hp gas engine, 5’ stroke, no mud, 150’ drill rod, 4 manual leveling jacks, limited clearance rig  Price:  $16,500

DRILL2WATER MODEL 84 TURBO  (Ref#R)  Manufactured , Gardner Denver 2 x 3 mud pump, top head drive, Kobuta 90 hp Turbo diesel engine, mounted on tandem axle trailer, 300’ of 2-7/8” x 9’ drill pipe, 3 jacks  Price:  $75,000

ARDCO TOP DRIVE TRUCK MOUNTED DRILL RIG  (Ref#T)  Mission 4 x 3 centrifugal pump, Deutz air cooled 4 cylinder deck engine, mounted on Ford F650 truck with Ford diesel engine, tires like new built on a Failing body, 300' depth capacity, 200' pipe, been sitting for 3-4 years  Price on Request

DURAMAST –

SEISMIC DRILL  (Ref#Ta)  Duramast, Kaeser 210 cfm air compressor, Isuzu diesel engine, mounted on Morooka MST600VD  Price:  $49,500

SEISMIC DRILL  (Ref#Tb)  Duramast, 300 cfm air compressor (enclosed in steel protection case), Isuzu diesel engine, mounted on Morooka MST600VD  Price:  $49,500

Want more information on Crawler Mounted Pneumatic Tophammer Drill Rig? Feel free to contact us.

SEISMIC DRILL  (Ref#Te)  Good for parts, has two masts, no air  Price:  $24,500

Duramast drill rig  (Ref#T) - POR

DAVEY DRILL (Ref#R) Manufactured , mounted on CCC with new Detroit 6V92 Silver engine, open loop Sunstrand hydraulic system, swing out rod carousel, 256 Leroi air compressor, sandline, main winch, Holte 140 casing hammer system, all hydraulics & gear box rebuilt, 500’ of 4 1/2” drill pipe, plumbed for mud, rod box  Price:  $135,000

CANTERRA 450  (Ref#)  Manufactured , Detroit diesel 285 hp deck engine, 625/220 GHH air compressor, mounted on Mack tandem axle truck with diesel engine, 5 x 6 mud pump, 4 leveling jacks, auger racks, hammer racks, good condition  Price:  $155,000

CANTERRA 312 BUGGY RIG  (Ref#)  Manufactured , rig compressor and water tank mounted on separate buggy, designed to go anywhere.  Rig: mounted on 4 wheel articulating buggy, powered by 240 hp Cummins diesel engine, sliding angle mast, drills vertical to 45°, can drill to 1,000’, uses 10’ drill pipe, 3-7/8” diameter, air side inlet, reverse circulation package, 4” hammer, ’ of Matrix drill pipe x 10’, has been used in Alaska to the US desert.   Compressor:  900/350 Sullair compressor, mounted on 4 wheel buggy, John Deere log skidder C543, powered by 8V92 Detroit diesel, articulating.   Water buggy:  water tank mounted on John Deere log skidder 543, powered by 6V92 Detroit diesel.    Complete Package, ready to drill:  $525,000

CANTERRA CT-411 DRILL RIG  (Ref#918T)  Manufactured , Detroit 671 deck engine, mountdon Military AM General 6 x 6 truck with Cummins engine, currently working  Price:  $200,000

CANTERRA CT-311  (Ref#T)  Manufactured , air compressor, mounted on Volvo with diesel engine, PTO, 3-1/2” x 20’ drill pipe.  Includes Volvo service truck with diesel engine  Package Price:  $64,500

CANTERRA CT-350 MUD ROTARY DRILL RIG  (Ref#Tc)  Manufactured , Gardner Denver 5 x 6 mud pump, Rineer sliding top drive ( lbs rotary torque), 28,000 lbs pullback, lb wireline winch, lb winch, mast has sliding base and wig wag, mounted on Sterling truck with Cat engine, rig is equipped with hydraulic coil, 250m 1-3/4” psi hydrauoic hose with spooler  Price:  $190,000 USD

CANTERRA CT-250  (Ref#T)  Mounted on AWD International , single rod loader, pipe spinner, 3 hoists, cathead, 4 x 3 Mission Sandmaster, 3L6 Moyno, desander, 3.9 – 125 hp Cummins deck engine, 300 gal SS pan, 200/150 air compressor, new hydraulic system installed  Price:  $155,000

GUS PECH BRAT  (Ref#T)  3 x 4 Mission pump, no air, mounted on Ford cabover w/210 Turbo diesel engine, PTO, 3 underbody toolboxes, (1) 3’ toolbox behind cab, ready to go, tools  Price $65,000
Available at extra cost:  400’ of 3-1/2” x 20’ drill pipe, (2) stabilizers

GUS PECH GP  (Ref#T)  Mounted on International truck with DT466E engine, 22’ stroke, vari-speed head: 30,000 ft/lb at 233 rpm, 10,000 ft/lbs at 100 rpm, mast extended on both rigs, hyd foot clamp, hyd breakout wrenches, hyd operated arms with winches, used for large core drilling  Price:  $115,000

GUS PECH BRAT GP BRAT  (Ref#N)  Manufactured , mounted on Transequip ATV2 axle all wheel drive, all terrain tires, Cummins diesel engine with PTO, 3L6 Moyno pump, 28’ mast, uses 20’ drill rod or auger, front and rear leveling jacks, high torque, drilling capacities:  with 4-1/2” auger can drill to 250’, with 3-1/2” drill pipe can drill to 700’    PRICE:  $120,000

GUS PECH GP-900R TOPHEAD DRIVE DRILL RIG  (Ref#T)  Manufactured , 24,537 lbs pullback, ft/lb torque, mounted on Western Star with Cat E engine, hydraulically driven Gardner Denver 5 x 6 mud pump, Volvo Penta diesel deck engine runs rig, has lift eye and lift sling, 300’ of 4-1/2” x 20’ flush joint pipe, air compressor available that could be mounted on rig if needed  Price:  $215,000

GUS PECH GEO SWING 600 DRILL RIG  (Ref#Tb)  Cummins deck engine, rubber tracks, 420’ of 3” x 10’ rod and 400’ of 4” rods, some tooling and water swivels Price:  $105,000

GUS PECH 450R BANTAM DRILL (Ref#Nc) Manufactured , Cummins 4BTA deck engine, mounted on International , 22’ stroke, hydraulic swing around jib with hydraulic extension, # winch, 4 hydraulic outriggers, rod rack, toolbox, ft/lb torque, centerline 150psi/400 gpm pump, head completely rebuilt  Price:  $170,000

GUS PECH DRILL RIG  (Ref#Tc)  Manufactured , top drive rig with 40,000# pullback, 200/300 air package, Centerline pump, mounted on Freightliner truck  Price on Request

BUCYRUSERIE (Ref#R) heavy mast, # pullback, 4 part main winch, mounted on CCC with new Cummins 400 Big Cam engine, 5x6 GD mud pump, (2) Leroi 256 air compressors, sandline, all new tires with flotation in front, Holte 140 casing hammer & underreaming system, 600’ of bottleneck pipe & tools  Price:  $175,000

BUCYRUS ERIE 12R  (Ref#N)  Manufactured , mounted on Ford truck with Cat engine, PTO, 450/250 air compressor powered by 671 Detroit diesel engine, 10 gpm water injection pump, 400’ of 4-1/2” IF thread pipe,    PRICE:  $80,000

BUCYRUS ERIE 12R  (Ref#)  Manufactured , top head drive, mud and air combination, LDS 100 air compressor, 5 x 6 GD mud pump, mounted on Ford truck w/ Cat engine, Bean water injection pump  Price on Request

SHOP BUILT TOPHEAD DRIVE/CABLE TOOL (20W) COMBINATION RIG (Ref#Na) Cummins deck engine, mounted on Ford L with Cummins engine, 4 x 4 Mission magnum mud pump, 185 CFM air compressor, 360’ pipe  Price:  $60,000

SCORPION TRACK DRILL  (Ref#Tb)  diesel engine (rebuilt), 900 cfm air compressor,  361 hammer, 8” wide, good tracks, complete, last drilled , approx 25,000 miles, set up for T45, max diameter 3-1/2”  (3 parts rigs available at extra cost) Price:  $21,000

GARDNER DENVER (Ref#R) track mounted with Cat engine, good condition, includes parts rigs & tons of extra parts  Price $34,500

JOHN HENRY JH28 ROCK DRILL  (Ref#Ta)  mounted on Komatsu PC 120-3, engine needs work  Price “as is”:  $32,500

LEROY ROCK DRILL  (Ref#Tg)  track mounted, Leroi 175 air cooled Deutz diesel turbo compressor, Duetz diesel engine (air cooled), Atlas Copco rotary head / extra swivel, setup for air rock drilling, air drilling and mud rotary drilling, hydraulic breakout wrench, angle drilling, extra hydraulic drifter, boom extension, track escillation, feed shell dump, boom swing, feed shell pivot, housing angle  Price on Request

FUTROS  (Ref#T)  , mounted on Western Star with Cat C15 engine, PTO, located Canada Price:  $140,000 USD

DANDO MULTITEC  (Ref#R)  Manufactured , 20,000# weight, mounted on crawler base, 18’ height, 11.5’ travel, 20,000# hoist force, 13,000# feed force, double clamps 60m – 250mm diameter, FMC LO618 triplex piston pump (36 gpm/700 psi) for coring, oiler for DTH, 4 leveling jacks, cyclone reverse circulation, comes with 500m of 3” lightweight pipe (300m brand new), located Canada  PRICE:  $225,000 USD

WILCO CORE RIG / DRILL PACKAGE & MUD SYSTEM (Ref#Na & Nb)
Can Core Drill or Standard Drill
WILCO DRILL RIG ON CRAWLER  (Ref#Na)
Manufactured
Drill carrier: 6’ X 6 X 38’ pontoons, cabin – heated, AC,  swivel operators chair, deck and spot lights, full instrumentation, video/audio monitoring system, retractable stairway, Cat C15 engine rated at 540 HP @ RPM, Funk rubber block pump adaptor, liter hydraulic reservoir.
Self-leveling deck
Dog house 6’ x 10’ with custom control console, swivel chair, intercom to drilling platform, insulated, fluorescent lighting, electric heat. 
Range II single piece mast (pipe and casing) rated at 60,000 pounds with a drilling depth of feet and pull down of 20,000 pounds, twin hoisting cylinders on mast.
Conveyor belt pipe handler. Custom built Range II tubular (pipe) handling system with pipe rack, tilt and kick cylinders 
Ingersoll Rand TH60 top drive with link tilt capability, hydraulic elevators, hydraulic slips.
Warrior hydraulic wrench with 31/2 to 105/8 make/break out jaws with spinner.
Custom built Warrior coring winch hydraulically driven with Kobelt brake and meters if ¼ cable.
Gensco model  HG60 genset 60 KVA  driven by Kawasaki hydraulic motor.
PRICE:  $235,000
WILCO SUPPORT SYSTEM  (Ref#Nb)  Manufactured ,
Gardner Denver mud pump rated at 1.7M/3 min @215 bhp with conventional heads, pulsation chamber, Odrill relief valve, 3.0” mud valve, exhaust fan, mixing hoper, liner wash pump and lubricator, driven by Eaton hydraulic pump with gear reducer and rubber block gear box. Pump house fitted with core bench, storage cabinets, insulated, fluorescent lighting, electric heat, 20 M/3 four compartment mud tank, electronic float levels, Tsunami sump pump, Mission 4x3 pre-charge pumps, Derrick FC-313M liner motion shale shaker with super G agitator.  All ancillary equipment hydraulically driven off Funk rubber block four pump adaptor powered by C15 Cat engine rated at 540 HP @ RPM. Aluminum liter hydraulic tank. Operators cabin – heated, AC, swivel operators chair, deck/spot lights, full instrumentation, audio/video monitoring system, roof beacon, Retractable stairway. Aluminum fuel tank. Self-leveling deck. Pontoons 6’ X 6’ X 38”, four compartment, aluminum cleats, 5.0” chain.
PRICE:  $210,000  
WILL SELL SEPARATELY AND WILL SEPARATE CRAWLER FROM RIG OR CRAWLER FROM SUPPORT SYSTEM AND SELL THAT SEPARATELY.

SANDVIK TAMROCK   (Ref#T)  Year  Price:  $100,000

SANDVIK TAMROCK DX800 DRILL RIG  (Ref#496Tb)  Built , 11,000 hours, located Middle East  Price:  $185,000 USD

TAMROCK 660  (Ref#Ta)  Manufactured , 285 psi on board air compressor, Cat engine, HL 600 hammer, rod changer, track mounted, has 20’ mast, set up for T45 rod but can run T51 rod  Price:  $38,500
Rod available at extra cost

SANDVIK PANTERA dpi  (Ref#T)  Manufactured , Cat C13 Tier 4 final diesel engine, Price:  $265,000

FURUKAWA  (Ref#Tb)  new engine @ , new compressor    PRICE:  $95,000

FURUKAWA DRILL  (Ref#T)  Manufactured   Price:  $70,000

FURUKAWA HCR 900 (Ref#R) Manufactured , Cat engine, angle capability, dust collector, water tank, no rod changer  Price:  $155,000

TEI HEM550 DRILL ATTACHMENT (Ref#T)  Manufactured , remote control Price:  $125,000 USD

TEI ROCK DRILL  (Ref#T)  all hydraulic, 12’ stroke with sub, head new , mounted on skid steer, down hole hammer, 135’ of 2-3/4” drill string  Price:  $40,000

SULLIVAN AIR TRACK ROCK DRILL (Ref#Tb) with boom extension, air/hydraulic elevation, air motor feed drive, Joy air drill head, ILMEG AS-900 dust collector system, located Canada  Price on Request

TAMROCK DHA HYDRAULIC CRAWLER ROCK DRILL (Ref#Tc) with CATERPILLAR turbo diesel engine, drill head, dust collector system, full cab enclosure with heat, hours recorded on meter at the time of listing - meter considered inaccurate, located Canada  Price on Request

GARDNER DENVER ATD AIR TRACK ROCK DRILL  (Ref#Ta)  16’ mast, boom, rotation drill head Atlas Copco DHR56A, air/hyd elevation, air motor feed drive, winch, 3.5” API, new track pads  Price on Request

GARDNER DENVER AIR TRACK ROCK DRILL  (Ref#Tb)  15’ mast, boom, air/hydraulic elevation, air motor feed drive, Canyon equipment Marini EP 120 air rotation head  Price on Request

GARDNER DENVER ATD- AIR TRACK ROCK DRILL  (Ref#Tc)  16’ boom, air/hydraulic elevation, new track pad, drill head and components dismantled (rebuilding), air feed motor, Joy 280 hammer with T45 shank  Price on Request

CUBEXQXR920  (Ref#Ta)  POR

CUBEX TRACK MOUNTED DRILL RIG  (Ref#Ta)  Manufactured   Price:  $370,000

CUBEX WHEEL MOUNTED DRILL RIG  (Ref#Tb)  Manufactured   Price:  $315,000

FECON (FORMERLY DYNADRILL) MOBILE TRACK DRILL  (Ref#R)  Manufactured , mounted on rubber track base, 300/175 on board air compressor, 100 hp Kubota turbo diesel, can drill up to 300’, used for getothermal wells and seismic drilling, 10,000# overall weight, includes 200’ of drill pipe, Sandvik hammer and bits, transition rod and auger  Price:  $130,000

ATLAS COPCO F9 TRACK DRILL  (Ref#T)  Manufactured , Cat C9 engine, air compressor, good condition  Price: $125,000

ATLAS COPCO ROC D9-11 TRACK DRILL  (Ref#Ta)  Built , Cat C7 engine, winch, Canada  Price:  $200,000 CDN

ATLAS COPCO ROC D9-11 TRACK DRILL  (Ref#Tb)  Built , Cat C7 engine, winch, Canada  Price:  $200,000 CDN

ATLAS COPCO FLEXIROC T20R 4WD DRILL RIG  (Ref#Tc)  Built , 82 kw diesel power, Canada  Price:  $238,500 CDN

ATLAS COPCO ROC D3  (Ref#Ra)  Manufactured , 5m reach, Cummins QSB 4.5 engine, Atlas copco screw compressor  Price:  $90,000

ATLAS COPCO ROC-D3 (Ref#R) Manufactured , track mounted with 4 cyl Deutz diesel engine, compressor, no rod changer, currently drilling, one owner, wants to retire, set up for T38 rods    PRICE:  $95,000

EPIROC 780 DRILL RIG  (Ref#571T)  POR 

ATLAS COPCO 842  (Ref#Rb)  includes hammer, John Deere diesel water cooled deck engine, Quincy 185 cfm air compressor, fuel pump needs repair  Price:  $25,000 USD

ATLAS COPCO 712  (Ref#Rc)  sitting a few years, good for parts, Deutz diesel engine with low hours  Price:  $12,500

ATLAS COPCO 812 PARTS RIGS  (Ref#Rd)  no engine Price: $7,500

ATLAS COPCO HAMMER (ref#Re) Price: $25,000

SURE STRIKE MODEL ROCK BREAKER ATTACHMENT  (Ref#Rb)  Manufactured , 15,900# wieght, 52,000# single blow impact energy, 20 blows per minute, to be used with 100,000 excavator class  Price on Request

EVERDIGM MODEL T450 SELF-CONTAINED HYDRAULIC BLAST HOLE DRILL  (Ref#T)  Built , set up for T51 tooling, 3” – 4-1/2” diameter x 84’ depth, 283 cfm/152 psi air compressor, 16.5’ folding boom with swing angle (10 degree L / 45 degreesR), lift angle 90 degrees up and 5 degrees down, very good condition  Price:  $95,000

REEDRILL SK62  (Ref#)  track mounted blast hole drill, /150, Cat diesel engine, all hydraulic, heavy duty, bare rig    PRICE:  $175,000

REEDRILL SKF50  (Ref#Rb)  /125, Cat , runs 6” x 30’ pipe  Price:  $140,000

REEDRILL SKF50  (Ref#Rc)  /125 Sullair, Cat, runs 6” x 30’ pipe  Price:  $140,000

REEDRILL SK50I  (Ref#Re)  900/125 Sullair compressor, Cat , runs 5-1/2” x 30’ pipe  Price:  $65,000

REEDRILL SK50I  (Ref#Rf)  /125 air compressor, Cat , runs 6” x 30’ pipe  Price:  $80,000

REEDRILL SK50I  (Ref#Rg)  /125 compressor, Cat , runs 6” x 30’ pipe  Price:  $140,000

REEDRILL SK45I  (Ref#Rd)  /125 Sullair, 855 Cummins, runs 5-1/2” x 30’ pipe  Price:  $100,000

REEDRILL SK40  (Ref#R)  Manufactured , track mounted, 750/150 air compressor, Cat deck engine, good running condition    PRICE:  $45,000

REEDRILL SK35 (Ref#R) Manufactured , Cat deck engine, mounted on CCC with 335 Cummins (needs a little work) 850/350 air compressor, dust collector, 6 rod carousel, no water tank, 6 joints of 4 1/2” x 25’ drill pipe, 3 hydraulic leveling jacks    PRICE:  $37,500 OBO

REEDRILL SKF  (Ref#Ra)  /125 air compressor, Cat , runs 6” x 30’ pipe  Price:  $150,000

REEDRILL SKF CRAWLER MOUNTED BLAST HOLE DRILL  (Ref#Tc)  Manufactured , /350 air compressor, dust suppression, A/C cab, 18” triple grousers, good condition, located Canada  Price on Request

REEDRILL SK-25  (Ref#Ri)  450/100 Leroi air compressor, Cat, runs 4-1/2” x 25’ pipe  Price:  $60,000

TEREX REEDRILL R30C  (Ref#T)  Manufactured , diesel engine  Price:  $129,500

TEREX REEDRILL R20C (Ref#R) Manufactured , cab drill with HPR drifter, Cat 312 undercarriage, Isuzu diesel 6 cyl engine with Gardner Denver Tempest 12 250cfm on-board air compressor, excellent condition  Price:  Canadian $250,000

CAT BLASTHOLE DRILL  (Ref#T)  Track mounted, Mach IV Sherman tank undercarriage, 6V71Detroit diesel engine, 600/120 air compressor, operator’s cab, rod box, pipe, bits, tools etc., sitting since but running when parked  Price:  $22,500 USD

EGT VD CRAWLER ROTARY DRILL (Ref#T) Manufactured , set up for jet grouting, 26,000# feed, 26,000# pullback, 28,300 ft/lb torque, 250 hp diesel engine, main rotation pump psi @ 34 gpm, feed pump psi @ 10 gpm, aux pump psi @ 7 gpm, mast length (hoist block installed) 40’6”, drill stroke 37’, 78,000# standard mast Price: $205,000

EGT MD  (Ref#R)  Manufactured , track mounted, 30’ mast with winch for 20’ lengths, rotary head (rebuilt Rexrth A6VM80 motor), coursel rod loader, clean under carriage, tethered remove control, Cat 6-cylinder engine, 2 front and 2 rear jacks, 23,600kg, sitting for a long time  PRICE:  $37,500

EGT 500 TRACK DRILL  (Ref#T)  POR

GILL BEETLE  (Ref#T)  John Deere engine, rebuilt , track mounted, no compressor, some pipe in carousel  Price:  $29,500

GILL BEETLE  (Ref#T)  Manufactured ’s, track mounted 4 cyl diesel engine on fresh rebuilt, 6 rod carousel, approx 450’ of 10’ aluminum rods, 6 rod carousel, Price:  $64,500
Available at extra cost:  900 cfm IR air compressor with Cat engine

GILL BEETLE 136R (Ref#T) Manufactured . Reworked. 100' hose reel, carousel holds 16' rods x 4" diameter. John Deere diesel engine. This is rubber track mounted. Can run with 750/350 compressor, or larger compressor for deeper/greater diameter holes, compressor not included. Price: $120,000

GILL BEETLE MODEL 300C ROCK DRILL  (Ref#Ta)  Manufactured , hours, chain winch, rops, ac/heat, 4.5L John Deere HF-485A engine, 160 hp, shoe width 14”, track mounted, EPA label,  ready to work  Price:  $285,000 USD

GILL BEETLE 200C ROCK DRILL  (Ref#Tb)  Manufactured , 16,116 hours, Cummins 4BTA 116-, 116 hp, cable winch, 14” pads, track mounted, EPA label, ready to work  Price:  $100,000

BEETLE DRILL MODEL 150C (Ref#Ra) Manufactured , crawler mounted with 4 cyl Cummins engine, cab & A/C, good condition  Price:  $90,000

GEMCO BUGGY RIG (Ref#Ra) Manufactured , 453 Detroit diesel engine, 13’ mast, 4 1/2 x 5 mud pump, fluid end rebuilt with “0” hours, main winch, sandline, new motors on rotary and pulldown, 99% tires, some new u joints, fresh paint, spares,  300’ of 10’ x 2 3/8” Mayhew Jr. pipe, ready to go  PRICE:  $39,500

A BUGGY DRILL RIG AND SUPPORT EQUIPMENT PACKAGE  (Ref#T)
ARDCO TOP DRIVE DRILL RIG (T1), 453 Detroit engine, 4-1/2 x 5 Gardner Denver mud pump, 542 New process transmission, 2-stage hydraulic pump, mud pit
ARDCO DRILL BUGGY (T_2), Built , 6 cylinder 300 gas engine, Moyno 8L pump, 353 Detroit deck engine, new tires
ARDCO WATER BUGGY (T_3)453 Detroit engine
TRANSEQUIP DRILL FRAME (T_4) clutch assembly, 4 good tires, no engine or transmission
GEMCO STRAIGHT FRAME (T_5) 4 speed transmission, 453 engine
TQ FRAME (T_6) 453 Detroit engine
ARDCO DRILL 453 (T_7) Detroit engine, 542 transmission, chain case, 4-1/2 x 5 mud pump
GEMCO DRILL BUGGY  (T_8) Detroit V8 engine, 4-1/2 x 5 mud pump, 4 speed Splicer transmission and transfer case, 3-stage hydraulic pump, rotary/gear box
ARDCO TOP DRIVE DRILL RIG (T_9) 453 Detroit engine, 542 new process transmission, 2-stage hydraulic pump, no mud pump, no rotary, no PTO
ARDCO WATER BUGGY FRAME  (T_10) 453 Detroit engine block, no head, chain case
GEMCO DRILL  (T_11) no engine, 4-1/2 x 5 Gardner Denver mudpump, chain case, hydraulic rotary, 3-stage hydraulic pump
PACKAGE PRICE FOR QUICK SALE:  $110,000 USD

ARDCOK BUGGY MOUNTED SEISMIC RIG  (Ref#T)  453 Detroit engine, American 4-1/2 x 5 pump, winch, 100’ of 10” pipe  Price:  $90,000

ARDCO BUGGY RIG (Ref#R) transquip topdrive, Cat engine, Leroi 256S2 air compressor, GD 4 1/2 x 6 mud pump, 300’ of 10’ x 2 3/8” Mayhew Jr pipe, currently drilling, excellent condition    PRICE:  $115,000

ARDCO C DRILL AND WATER BUGGY PACKAGE  (Ref#T) 
Ardco K 4 x 4 with C drill powered by rebuilt Detroit 453 diesel engine, ties: 23.1 x 26 rice and cane grip, Ramey 700 winch with 5/8 cable, 4-1/2 x 5 Failing duplex mud pump, 542 new process transmission, chain case, Rockwell rear ends.  Well maintained and field ready.
Ardco K 4 x 4 with 800 gallon water tank, new 300 6-cylinder Ford gas engine, tires: 23.1 x 26 rice and cane grip, Ramey 700 winch with 5/8 cable, 542 new process transmission, chain case, rockwell rear ends, well maintained and field ready
Package Price:  $87,500

ARDCO C DRILL  (Ref#Rc)  mounted on Ardco buggy with 453 Detroit engine  Price:  $34,500

ARDCO C DRILL RIG  (Ref#Ta)  4-1/2 x 5 mud pump, no air compressor, mounted on International single axle truck with DT466 engine, PTO, 3 hydraulic leveling jacks, runs 20’ rods, no rod or tools included  Price:  $55,000

ARDCO 4 X 4 BUGGY DRILL RIG AND TRANSEQUIP WATER BUGGY  (Ref#Ta)  Rig has Cummins 5.9 diesel engine  Price:  $115,000 for both

ARDCO K DRILL RIG BUGGY AND WATER BUGGY  (Ref#T)  Detroit 453 engine, Gardner Denver 5 x 6 mud pump, no air, and ARDCO WATER BUGGY with Detroit 453 engine, 750 gallon tank, both ready to work  Price:  $110,000

ARDCO BUGGY RIG  (Ref#T)  No mud pump (removed), mounted on 4 x 4 Ardco buggy with Detroit 453 diesel engine, 2 rear hydraulic leveling jacks, new pipe and bit  Price:  $57,500

ARDCO AIR BUGGY DRILL  (Ref#T)  LeRoi 50S air compressor, 453 Detroit diesel engine, top head drive will be installed and operations  Price:  $43,500

ARDCO BUGGY DRILL RIG AND WATER BUGGY  (Ref#Ta)  Rig manufactured , Cummins engine.  Ardco 750 gal water buggy with Detroit engine  Price:  $112,500

ARDCO DRILL RIG  (Ref#893T)  Gardner Denver 5 x 6 piston pump, no air, all hydraulic, goes to 3-400’, 4 cyl John Deere diesel deck engine, mounted on International truck with DT466 engine  Price:  $54,500

ARDCO DRILL RIG  (Ref#142T)  5 x 6 mud pump, hydraulic tiling pipe rack, mounted on mid ’s low profile International truck with DT engine, 300’ Mayhew Jr drill pipe  Price on Request

ARDCO DRILLS  (Ref#T)  2 available, 4-1/2 x 5 Gardner Denver mud pumps, 453 Detroit diesel engines  Price:  $43,500 each

HILYARD/ARDCO  (Ref#T)   International 4x4 truck, DT466 Turbo, PTO driven Hilyard mast converted to Ardco controls, 4 x 3 mud pump, 2 x 3 spare, sandline winch, mud pan, 400’ Mayhew Jr rods, 5 Red Devil PDC bits  PRICE:  $53,500

HILYARD RIG (Ref#RA) 453 Detroit engine (engine overhauled with only 100 hours), mud pump removed, mounted on Chevrolet 4 wheel drive truck (not road legal), center section in derrick to allow use of 20’ drill pipe (bolts in so it can be easily removed), rig has been sitting since , no pipe or tools available  Price:  $16,500

HIGHLAND DRILL/GEMCO APACHE 4 X 4 BUGGY  (Ref#T)  Ingersoll Rand 151 screw air compressor (rebuilt), 151 Cummins 8.3, Case J1-6T-830, Ardco drill buggy/tractor, bits  Price:  $40,000

TRANSEQUIP 4 X 4 BUGGY DRILL RIG AND TRANSEQUIP WATER BUGGY  (Ref#Tb)  Rig has 453 Detroit engine  Price:  $115,000 for both

HILYARD WATER/DRILL BUGGY  (Ref#T)  4-1/2 x 5 Gardner Denver mud pump, 453 Detroit diesel engine  Price:  $40,500

SEISMIC DRILL BUGGY AND WATER BUGGY  (Ref#N)
(2) GEMCO drill buggy  Price:  $150,000 each
(1) Hillyard D14 drill buggy  Price:  $145,000
(3) water buggy  Price:  $65,000 each

IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATION AND ANGLE (Ref#Ta)  Built , heavy duty chains on mast/topdrive, engines updated in to John Deere diesels, 580/75 or 380/250 2-stage air compressor, Clark 4 speed automatic transmission, 100 gallon on board water tank, Bean injection pump, front winch,  dims/weight: 27’L x 8’4”W x 9’6” H 30,000 lbs., no tooling included (green rig)  Price:  $115,000

 IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATION AND ANGLE (Ref#Tb)  Built , engines updated in to John Deere diesels, 580/75 or 380/250 2-stage air compressor, Clark 4 speed automatic transmission, 100 gallon on board water tank, Bean injection pump, front winch, dims/weight: 27’L x 8’4”W x 9’6” H 30,000 lbs., no tooling included  Price:  $115,000

Gold Mining Equipment Full Pneumatic Crawler Drilling Rig Hydraulic Rotary Geotechical Drilling Rigs

CYG-300L HYDRAULIC CRAWLER DRILLING RIG

1. Multiple functions, can do mud rotary drilling, air compressor DTH drilling. Can do core drilling, fast bore hole drilling as well as geotechnical testing such as SPT*.

2. Drilling mast can be set at -15°-90°.

3. Load Sensitive Proportional multi-way valve is adopted, high efficiency, energy saving, safe and reliable.

4. 2 sets of manual Gear Speed Grades, with dual motor, power head has stepless speeds 0-378 r.p.m.

Contact Us

Sales Manager Cindy Tang

Mobile//Wechat :+86- (online support)

Skype: tangjingjing31

Mail :

Contact us to discuss your requirements of DTH Drill Bits. Our experienced sales team can help you identify the options that best suit your needs.