The Best Places to Buy Acrylic Polymers for Adhesive Tape Manufacturing Online and In-Store

CS Hyde is a supplier and converter of PTFE Tapes made with Teflon™ Fluoroplastic. PTFE (Teflon®) is one of the most chemically inert materials available and it does not support combustion, has a low coefficient of friction, and there are few substances that will stick to its surface. CS Hyde PTFE tapes have unique properties including non-stick, anti-friction, anti-static, high temperature resistance, and chemical resistance. PTFE tapes can either be coated with Teflon™ PTFE or constructed from skived or tensilized PTFE Film. Skived PTFE Tape is made by slicing natural PTFE into layers to achieve nominal thickness. Tensilized PTFE is made by stretching PTFE Fibers, this process helps create PTFE tape with high density or high tensile strength. The most common PTFE coated tape is PTFE Coated Fiberglass or also know as “PTFE heat tape”. PTFE Fiberglass tapes consist of woven fiberglass fibers coated with Teflon™ PTFE. These tapes are widely used in packaging applications on heat sealers to seal bags or other similar products. PTFE Coated Fiberglass tapes are available with different grades of coating including: Standard and Ultra-Premium grade with either silicone or acrylic adhesive. Other PTFE coated tapes include Optically clear FEP Tape, FST Tape, R-Tape (Roller Tape), Para-Arimid Kevlar® Tape and TFL Laminate Tape.CS Hyde supplies skived PTFE tape with high bond acrylic, standard acrylic and silicone adhesive in a thickness range (.002” to .010”). Thick gauge PTFE tape or “FAT” PTFE Tape is also available in a thickness ranges (.020”-.125”) with either acrylic or silicone adhesive.Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company. PTFE Tapes made with Teflon™ Fluoroplastic are available in slit to width rolls, sheets, and die cut parts. All stock products are available for same day shipping. CS Hyde offers discounts on quantity orders, and little to no minimums on custom orders.

If you are looking for more details, kindly visit Dewangtai.

UHMW tape or (Ultra High Molecular Weight Polyethylene) tape is made of a high-performance thermoplastic film that is strong and versatile due to its high abrasion, impact, and wear resistance. UHMW tape is unique because it also has a non-stick, low friction surface similar to Telfon® PTFE but more durable due its abrasion resistance. These performance properties enable UHMW tape to be utilized for sound dampening or eliminating squeaks and rattles caused by adjacent part movement. Due to its properties many names can be associated with UHMW tape including: Slippery tape, Low-friction tape, Chute Tape, or Slick tape among different applications or industry.Improve packaging- UHMW tape is widely utilized within the packaging industry specifically on conveyor systems because they are built with many adjacent moving pieces and have multiple locations that friction and abrasion occur. UHMW tape can be used to improve chutes, liners, and rail guide systems enabling boxes, products, or goods to move freely preventing jams and a potential line shut down.Improve Surface Protection- UHMW Tape is effective as surface protection to improve worn down or sticking surfaces. UHMW’s slippery surface and impact and abrasion resistance makes this tape a great option to enhance different types of surfaces and bearings. The adhesive backing allows for easy peel stick installation eliminating the need for mechanical fastening. High Bond UHMW Tape adheres suitably to metallic or low surface energy surfaces including plastics, powder-coats, foams, and oily metals. Example applications include roller bearings, work benches, shipping tables, toolboxes or anywhere abrasion and impact could be detrimental.Reduce Friction- UHMW tape can be used to reduce friction due to it slippery surface. This can be beneficial on several types of machinery that incorporate sliding components. For example, UHMW tape is commonly used in the woodworking industry on table saws and jigs to improve the sliding ability of the guide rails. It can also be utilized in building or home fabrication to reduce friction and improve functionality of door jams, windowsills, sliding doors, drawer slots, kitchen cabinets, and numerous other applications where friction becomes a problem.CS Hyde supplies and converts several types of low friction UHMW tapes including:High-Bond Acrylic UHMW Tape, Standard Acrylic UHMW Tape, Rubber adhesive UHMW Tape, Black Anti-Static UHMW TapeUHMW Tape is available in sheets, specific widths, or custom die cut parts.

CS Hyde Company stocks and converts different types of adhesive backed Kapton® Polyimide tape.Kapton® (Polyimide) Adhesive Tapes have superior dielectric strength, high temperature & chemical resistance as well as tear, puncture, and abrasion resistance. Kapton® Tape obtains its polymer performance properties because it is derived from DuPont® Kapton® Type HN Film. Kapton Polyimide tape can maintain its excellent physical, mechanical, and electrical properties over a wide temperature range making it ideal for wrapping, bonding, and mounting applications. Kapton® Polyimide tapes are most used in electrical applications such as coil insulation, capacitor and transformer wrapping, magnetic wire insulation, wave soldering and high temperature masking.How is Kapton® tape used in industries today?Kapton® has been around sincle the late s. As today's technology advances many more electrical components are being integrated into industries like automotive, marine, aeronautical, aerospace, and locomotive. Kapton® Tape can be used to wrap wires, switches, diaphragms, sensors or heated coil components like those commonly found in seat heaters (warmers). Kapton® tape with silicone adhesive is rated (-100°F to 500°F). For more permanent applications that require more “high tack” adhesion Kapton® tape with acrylic adhesive rated (-20°F to 350°F) is recommended. For electronic components that require extra protection from static damage during assembly or repair Electrostatic dissipative (ESD) polyimide tape is available. ESD polyimide tape helps provide protection from electrically charged objects that cause electric shorts or dielectric breakdown. ESD polyimide tape applications include masking gold contacts on PCBs or protecting sensitive components on circuit boards through manufacturing. For fabricating or mounting applications requiring adhesive on two or both sides Double Sided Kapton® tape is recommended. This tape is constructed to fill the requirements of a high performance thermoplastic polyimide film along with the high temperature resistance of silicone adhesive for a broad range of electronic assembly and electrical insulation applications. For example, double sided Kapton® has been used as a mounting system to manufacture photovoltaic panels (solar panels). Double sided Kapton® tape provides high temperature insulation and its two-sided high temperature silicone adhesive limits the need for mechanical fastening.When the application of Kapton® tape in some of these components require polyimide tape to be cut to a certain width or manufactured in to die cut parts like squares, washers, or circles. CS Hyde has in house converting capabilities to provide custom width rolls and die cut rolls with shapes designed for peel and stick application. Additionally, for more intricate Kapton® die cut parts we can utilize rotary die cutting or die less knife cutting that enables us to rapidly produce custom parts directly from a supplied .DXF drawing. CS Hyde also stock diffrent types of DuPont® Kapton® FILM (no adhesive - see films section). CS Hyde can also supply slit to width Kapton® film rolls in 50 FT and 100 FT lengths. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Teflon™ PTFE coated fiberglass tapes are made up of fiberglass fabric tighly woven from fiberglass fibers, then coated with Teflon™ PTFE. Fiberglass fabric provides superior dimensional stability while PTFE coating provides a slippery, anti-friction release surface. PTFE Coated fiberglass tape are an excellent product for various packaging applications requiring release properties, extreme temperatures (up to 500ºF), chemical, and environmental resistance. PTFE coated fiberglass can be used to cover heat sealing jaws and elements on various types of equipment such as shrink wrap/L bar, blister packaging, and form/fill/seal machines. Available in standard or premium grade fiberglass, with silicone or acrylic adhesive, with or without peel-off liner. For applications not requiring adhesive backing we also supply Teflon™ PTFE coated fiberglass fabric by the lineal yard. Thicknesses ranging from .003” to .019”.Standard Grade VS. Ultra Premium Grade Coated Fiberglass Tapes The main difference between standard grade and premium grade coated fiberglass tapes is the grade of the fiberglass fibers and the amount of PTFE Coating. Our ultra-premium grade (10-SX and 10-AX Series) are composed of higher-grade fiberglass fibers and an extra coating of Teflon™ PTFE. Silicone VS Acrylic Adhesive SystemsSilicone adhesiveRecommend for high temperature applicationsIdeal for requiring clean release adhesive removalSilicone Adhesive rated up to 500°FAcrylic AdhesiveRecommended for moderate temperature applicationsAcrylic Adhesive rated -40°F to 375°FIdeal for applications requiring high initial tack and strong bond adhesion.Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.

CS Hyde is a supplier of Silicone Strip N Stick Tape also known as “silicone gasket tape”. These tapes have a carrier made from a closed-cell silicone sponge, fiberglass reinforced sponge, solid silicone, or low-density foam substrate. These gasket tapes are available with a silicone or acrylic adhesive backing protected by a peel-off liner. Strip-N-Stick® Tape offers superior service life, excellent conformability, flexibility and a service temperature ranging from -100°F to + 500°F (-73°C to + 260°C). Other benefits include a low compression set and high adhesion to a variety of substrates. Strip n stick gaskets tapes can be used for high and low temperature resistance, enclosure or door gasketing, vibration dampening, and thermal insulation. Gasket tapes are unique because they can conform to irregular surfaces, wrap over or around cylinders, or be formed to produce right angles. Strip n stick tapes are a cost-effective solution for one application use or a gasket not requiring custom tooling or intricate parts.CS Hyde supplies strip n stick tape in widths ranging from .5”-2” wide in a variety of thicknesses and durometers. To learn more about the features of each gasket tape view options below. Order online- no minimum order quanity..X

FEP Optically Clear Teflon™ Tape is manufactured from DuPont™ FEP (fluorinated ethylene propylene) film, backed with high temperature pressure sensitive silicone adhesive rated to (-100°F-400°F). FEP tapes silicone adhesive backing exhibits great chemical resistance, electrical properties, and will remove cleanly with little or to no residue. FEP film itself possesses superior anti-stick, low friction, strength, puncture, chemical & solvent resistance surface properties. FEP film tapes complete composition is weather resistant, stable, and nontoxic making it a versatile performance tape for various applications and industries.FEP Teflon® Tape Applications:Coil & Transformer Insulation- FEP tape is primarily in electrical applications as coil and transformer insulation, cable termination insulation, and capacitor insulation due its high temperature resistance and dielectric strength of ( volts per mm).Wire, Cable & Harnesses Wrapping- Due to FEP tape conformability and optical clarity this tape is an ideal choice for wiring applications that require “see through” identification.Barrier Protection Tape- FEP tape can be used as a transparent surface barrier tape for extreme applications. Due to its high temperature, chemical, and weather resistance makes FEP Tape a performance option over common polyester surface protection tapes. Also, due to its optical clarity FEP tape could protect underlying painted substrates or label identification without affecting aesthetics.CS Hyde also supplies FEP Film rolls without adhesive that can be heat sealed, thermoformed, heat bonded, welded, or even combined with other materials as carrier substrates or insulator films.FEP Silicone Adhesive Thickness: *Item # 23-FEP- .002" FEP Film with ." Silicone Adhesive*Item # 23-5FEP- .005" FEP Film with .005" Silicone Adhesive*Item # 23-2A-FEP .002" FEP Film with ." Acrylic Adhesive

High Temperature Fiberglass tape or most known as Glass Cloth Tape, is a non-coated woven fiberglass fabric with a pressure sensitive silicone adhesive system on one or two sides. Glass cloth tapes are most used as high temperature masking tapes for flame spray applications or as high temperature electrical cable wraps. All fiberglass cloth tapes utilize silicone adhesive due to its temperature range of -100°F to +500°F.Types of glass cloth tapes:- Double Sided Fiberglass Tape: Double Sided Fiberglass Tape with High Temperature Silicone Adhesive on both sides. Withstands temperatures from -100° to +500° F and has silicone adhesive on both sides for superior bonding. 17-FibGX- Premium Fiberglass Tape:Premium Grade Fiberglass Tape is a pressure sensitive tape made of higher-grade woven glass fabric and high temperature silicone adhesive. The glass fabric has excellent abrasion and heat resistance. This product meets Federal Aviation Regulation Part 25.855 (a-1), and Govt. Specification Mil-I-C. 17-FibG- Standard Fiberglass Tape:Standard grade fiberglass tape is made of woven glass fabric and high temperature silicone adhesive. This product also meets Govt. Specification Mil-I-C. -497-410-Silicone Coated Glass:497 and are white/410 is blue: silicone rubber-coated glass fabric with a high temperature silicone adhesive. The silicone rubber is tough and abrasion resistant to withstand high temperatures and grit blasting impact. The silicone adhesive provides excellent adhesion at high temperatures yet removes cleanly. *497 and 410 meet Pratt & Whitney Specification of PMC – .

The company is the world’s best Acrylic Polymers for Adhesive Tape Manufacturing(rm,pt,ja) supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Mylar® film tape is constructed from DuPont Mylar® Type A polyester film laminated with an acrylic 300LSE high temperature 3M® adhesive. This polyester tape obtains Mylar® film performance properties including: balanced tensile properties, excellent resistance to moisture and most chemicals, as well as its temperature resistance rated (-100°F to 300ºF). Mylar tape with pressure sensitive acrylic adhesive is recommended for applications that require high initial tack and strong hold adhesion to low surface energy substrates like oily metals or some plastics. Mylar® tape with silicone adhesive can also be produced for applications that require a higher adhesive temperature range and clean release removal. Mylar® film with adhesive creates opportunities to incorporate Mylar® thermoplastic properties into new product developments and or improve existing applications. Utilizing a pressure sensitive adhesive system limits the need for mechanical fastening, enabling Mylar® tape to be used in tight enclosure spaces or placement over hard to drill substrates. CS Hyde can produce Mylar® Tape in a thickness range from .002” to .014. Utilizing on site converting capabilities we can produce slit to width rolls, sheets, or custom die cut parts. CS Hyde is also an authorized 3M® converter enabling us to acquire and laminate other specialty adhesives for property specific applications. Mylar® adhesive lamination can be produced on one or both sides of the film.

CS Hyde Company offers a number of high-performance/super-high temperature foil tape products. Products , 407, 409, and 411 are foil/glass laminates and provide excellent reflective and conductive characteristics in high temperature applications. The silicone adhesive demonstrates excellent adhesion at elevated temperatures (500F+) with clean release. , 407 and 409 are commonly used as plasma flame spray masking tape and as heat shielding in high temperature situations. The heavier duty 411 can be used in High Velocity Oxy-Fuel (HVOF) spraying applications.Products 498 and 501 are laminated with additional layers of silicone, providing superior protection in the most demanding HVOF applications.AFD- Aluminum Foil Discs come in convenient pre-cut sizes (1/4”, ½”. ¾”, 1”, 2” 3”) so you can easily cover small areas and holes during paint stripping and electroplating. Great as a moisture and dust barrier. Foil Discs make excellent reflective target for laser or optical beams. Easy to store, handle & apply. Very flexible and conformable. Discs are thermally conductive, heat and light reflective, flame resistant, outdoor weatherable and can help dampen vibration. Discs are .003" thick aluminum foil with 0." of acrylic adhesive. Temperature range is –30° to +325° F. Discs are sold per sheet or per roll with paper liner. Rolls are supplied on a cardboard spool with a 3" ID.

CS Hyde’s Metalized Polyester Film tape is 0.9 mil thick with a vibrant, mirror-like finish. It is available in Six Bright Colors: Silver, Black, Gold, Red, Green, Blue. Cut rolls are 1" wide x 72 yards long. Custom widths are our specialty.This tape has an aggressive, long lasting acrylic adhesive that maintains excellent solvent resistance and long-term aging properties. Metalized Polyester tape will not discolor over time and is UV resistant. It is flexible and dimensionally stable to 302F. It also features high reflectivity of both light and heat radiation, excellent heat resistance and easy unwind characteristics.Metalized Polyester can be used for splicing in high temperature applications and for a sensing tape for automated equipment used in sorting and counting. It can also be used in photo sensing applications to detect splices to facilitate roll change-over. Test Sampling Recommended.Use for reflective shielding, color coding and identification, plastic coated wallpaper with embossed surfaces, leaders for photo development. Metalized Polyester is also used for decorative trim, graphic and industrial art displays, for toys, appliances, and watercrafts. Can be used as an edging tape for photo preservation, chart presentation and cover art.

Custom

Fabrication Services

We have in house fabrication shops in all our locations that can make your design a reality.

Now more than ever, homeowners and business owners are looking to save money wherever possible. When done correctly with the...

Why Spill Kits Are Essential Spill kits are vital for quickly addressing hazardous spills, such as oil, fuel, or chemical...

Are you interested in learning more about Bulk Duct Tape? Contact us today to secure an expert consultation!